It is recommended to clean the following parts periodically to scan paper without
dirt or stains.
Document Scanning Area (Surface of the Long
Narrow Glass)
Clean the document scanning area once a week approximately.
82
1.
Open the upper left cover.
2.
Clean the document scanning area (2
places).
Wipe them with a dry soft cloth. Use a slightly
moist soft cloth if the dry cloth does not clean
well.
Do not use anything other than water such as
organic solvents, alcohol and neutral detergent.
Notes
• Take care not to cause damage where you
are cleaning.
• Take care not to leave any water inside the
equipment.
• Do not use organic solvents such as thinner
and benzene. They may cause deformation
or discoloration.