Toshiba e-Studio RD30 User Manual page 60

Item name
ADMIN Copy files To USB
* IPv6 settings can only be checked from the control panel. Use TopAccess to change the settings.
TopAccess Guide : "Chapter 7: [Administration] Tab Page" - "[Setup] Item List"
60
Setting Function description
During scanning, scanned data are temporarily stored in this equip-
ment to save the files to destination paths such as USB media.
If no USB media are connected to the equipment or the network
folder cannot be accessed, the scanned data cannot be transferred
to the destination path and remain stored in the equipment. If
scanned data continue to accumulate in the equipment, one of
the following error codes may occur, making the equipment be-
come unavailable: 2D11, 2D60.
For this reason, use this function after connecting the USB media
-
to the equipment to remove the scanned data as appropriate
(about once a month), depending on the usage.
Note
Transferring the scanned data to the USB media may take some
time.
Tip
If there is no scan data on this device, only an empty folder is cre-
ated on the USB media.