Toshiba e-Studio RD30 User Manual page 59

Item name
Test Print
Change PIN
ADMIN
USB Cloning
Setting Function description
Carries out a print test of the ink cartridge for reuse counter mark.
Yes, No
Placing paper in the paper feed tray and pressing
ing [Yes] runs the mark print test.
- Changes the administrator PIN code.
Creates a duplicate file of the setting data using the cloning func-
tion. You can install the created duplicate file on another Paper Re-
usable Device. This function is useful when you want to specify the
same settings in multiple Paper Reusable Device.
Selecting "Create Clone File" and pressing
to configure the PIN code. The configured PIN code is necessary to
"Apply Clone".
Notes
Create Clone
• When "cloning", make sure the source and target are running the
File, Apply
same software version. You can check the software version and
Clone
update from TopAccess.
TopAccess Guide : "Chapter 7: [Administration] Tab Page" -
"[Setup] Item List"
TopAccess Guide : "Chapter 7: [Administration] Tab Page" -
"[Maintenance] Item List"
• The PIN code is a number of up to 32 digits (0 to 9).
• When installing a clone file created using TopAccess, change the
extension of the clone file to "enc".
after select-
displays the screen
59
Continued on the next page