Toshiba e-Studio RD30 User Manual page 13

• Pull out the plug from the outlet more than once a year to clean around the prongs. Accumulating dust and dirt could cause a fire due to the heat
released by electric leakage.
• When removing the plug from the outlet, do not pull the power cord. Always hold the plug when removing it from the outlet. If the power cord is pulled,
the wires may break and this could cause a fire or give you an electric shock.
• Make sure that the ventilation holes are not blocked.
If the temperature within the Paper Reusable Device becomes too high, a fire could result.
Other points
• If there is insufficient space around the equipment, the poor ventilation will result in malfunction, also releasing paper misfeeds may become difficult. To
ensure adequate space, follow the table below as a guide.
Adequate space
Rear Left
20 cm (7.9") 30 cm (11.8")
• Be sure to fix the power cable securely so that no one trips over it.
• Adverse environmental conditions may affect the safe operation and performance of the Paper Reusable Device, and the Paper Reusable Device could
break down.
- Avoid locations near windows or with exposure to direct sunlight.
- Avoid locations with drastic temperature fluctuations.
- Avoid too much dust.
- Avoid locations that suffer from vibration.
Right
80 cm (31.5")
13