Toshiba e-Studio RD30 User Manual page 106

Model
Type
Erasure method
Erasure heat source
Scanning method
Scan sensor
Scan light source
Scan resolution
Loadable pages
Processing speed
Paper size
Paper weight
106
KH-1020/KH-1021
Console type
Twin heat roller duplex heating method
Halogen lamp
Fixed scanner with moving document (both
sides are scanned simultaneously)
CCD line sensor
LED
100, 150, 200, 300 dpi
2
125 pages (64 g/m , 17 lb. Bond) or stack
*1
height up to 15 mm
Erasure, scan, and sort: approximately 15
*2
pages/min (A4, LT)
Erasure and sort: approximately 15 pages/
min (A4, LT)
Scan only: approximately 15 pages/min (A4,
*2
LT)
Erasure only: approximately 30 pages/min
*3, *4
(A4, LT)
A4, A5, B5 (North America: LT, ST)
2
64 - 80 g/m , 17 - 20 lb. Bond
Upper drawer: Stack height up to 41.8 mm
*5
(1.6")
Drawer capacity
Lower drawer: Stack height up to 10 mm
*5
(0.4")
Warming up time
Approximately 40 seconds
USB 2.0 (Hi-Speed)
Interface
Ethernet (1000Base-T, 100Base-TX, 10Base-T)
Operating environ-
Temperature: 10 - 30 °C (50 - 86 °F), Humid-
ment (normal use)
ity: 20 - 85% (No Condensation)
AC 220-240 V±10%, 8 A (50/60 Hz): 2.0 kW or
Power requirements
less
and Power consump-
AC 120 V±10%, 12 A (50/60 Hz): 1.5 kW or
tion
less
W 470 mm (18.5") x D 470 mm (18.5") x H
Dimensions
825 mm (32.5")
Weight
Approximately 45 kg (99.2 lb.)
Space occupied
W 470 mm (18.5") x D 470 mm (18.5")
*1 For paper printed once and erased for the first time.
*2 The processing speed when the scanned data are saved to USB media is as follows:
300 dpi approximately 5 pages/min
200 dpi approximately 8 pages/min
*3 15 pages/min (A4, LT) for the first minute.
*4 15 pages/min (A4, LT) if the temperature falls below about 17 ˚C (62.6 °F) when a job
starts.
*5 For A5 and ST size paper, the drawers are treated as full after each job regardless of the
actual height of the stacked paper.
*6 Where the temperature is 20 ˚C (68 °F) or higher.
*6