Table of Contents
Advertisement
06. Features (2)
Event (Shock) recording
When an external shock occurs during the continuous recording mode, a three-axis acceleration sensor will detect it, allowing the
video — taken for a total 20 seconds, from the 5 seconds before the incidence to the 15 seconds after it — to be stored in the event
folder.
Manual recording
After regular mode booting, the AlbatrossⅡ recognize like Event(Shock) when users use the air touch function over 1second. So, It
saves 20 second long (5 seconds prior to the impact plus 15 seconds post the impact) video images as an event(Shock) in the Event
folder.
CCTV for your own car protection, recording in the parking mode
The AlbatrossⅡ enables detection and recording of motions (that may be associated with damages and losses) while the vehicle is in
the parking mode.
Auto memory management
Even if the memory is full, the Product enables constant recording of images by auto-deleting of old files and overwriting with new files
in chronological order.
Check the recording data in the exceptional PC viewer
When the users play the stored video images with PC viewer, it can show the front and rear video images at the same time with lots of
information for their driving conditions.
2ch Black Box for simultaneous Front and Rear monitoring
The Main Body of AlbatrossⅡ is used to record the front side, and at the same time the external camera fitted inside the car is used to
record the rear side.
Built-in Battery Discharge Protection and timer setting up
Urive Albatross is fitted with a device that prevents battery discharge during constant power use.
When the voltage becomes low during recording in the parking mode to the set cut-off voltage, power on Black Box is automatically
cut off so as to prevent consequential battery discharge. Users can choose the one step among 4steps of cut-off voltage and timers to
set up them.
PIP Drag & Drop
Users can drag and drop the front and rear windows where ever they want on the LCD.
9
9
Advertisement
Table of Contents
