File Open - Urive Albatross II MD-7500P User Manual

Table of Contents

Advertisement

22. File open

◆ Replaying stored video images : By opening a black box file in a specific folder, replay starts as it enters to the file list
automatically. If you want to replay a specific file, press replay button after selecting the file you wish to reply in a file list.
1.
Take Micro SD card out of the black box and connect it compute.
2.
Select
button in a viewer main screen.
3.
After selecting drive where the Micro SD card is loaded, select one out of the
folders below and then select a file and "open" button as shown in the picture on
the left. If you want to select multiple files, select the files by mouse while Ctrl or
Shift key is pressed.
3.1 Blackbox Folder : Folder containing constant storage files while driving
3.2 Capture Folder : captured images during driving in this folder.
3.3 Event Folder : Folder to store the event when an impact is
applied during driving
3.4 Parking Folder : Folder to store the event detected by sensing a motion
while the vehicle is parked
3.5 Parking Event Folder : Folder to store the event detected by sensing an
impact while the vehicle is parked
4.
Select a specific file in the list of main screen and select
double click the listed item.
Note)
Only video image of front view can be replayed in general video players from the
video images stored in 2 channels (Front + rear). In order to replay the video image of
rear view, a dedicated viewer should be installed before replaying it.
However, both video image of front and rear view can be replayed at the same time in
VLC media player. (Refer to website http://www.videolan.org for more details)
button or
51

Advertisement

Table of Contents
loading

Related Products for Urive Albatross II MD-7500P

Table of Contents