Table of Contents
Advertisement
10. Upgrade (2)
[How to auto-upgrade]
1.
Users can install the upgrade files from Albatross II Viewer in user's PC to a memory card. After connecting Micro SD card with
PC, Push the
button at the top of the left in the Viewer
2.
Check the firmware version at the Urive Albatross program information window. And then formatting the memory card in the PC
or Viewer. (But after formatting, users cannot check the firmware version.)
3.
Check the driver's location which is connected with memory card at the Urive Albatross II program information window.
After pushing the update button, the upgrade files
MD7500P_Kernel.bin, MD7500P_Meminfo.bin, MD7500P_Rootfs.bin)
1
6
2
7
8
(MD7500P_Bootmain.bin, MD7500P_Eboot.bin,
save automatically at the memory card.
3
9
4
5
10
16
Advertisement
Table of Contents
