Urive Albatross II MD-7500P User Manual page 20

12. Installation of Urive Albatross II – Rear camera
1
2
3
4
※ It is required to take precautions installing the rear camera to the rear window, considering that the quality of video may not be as good as
desired due to tinting or heating cables.
※ State check LED: Regular recording mode – Green LED On / Parking mode – Green LED Off
Clean the spot on the rear
window where the product is
installed.
Affix the Mount on the
desired point.
Connect the connection cable
micro USB port to the rear
camera.
While the power is turned off,
connect the rear camera
cable.
5
6
7
8
Connect the power cable
to the DC port and turn
on the power.
When booting is completed,
the front video will be
displayed and the voice
notification, "Recording
starts ", will be heard at the
same time.
Touching the LCD screen
once will bring up the main
screen.
Touching the "Rear video"
icon on the main screen will
bring up the rear video.
20