Table of Contents
Advertisement
20. Black-box configuration (4) – Voice/image/user setting
[ Voice/image setting]
[ User setting]
1.
When the audio/video setting tab is selected, it will be possible to set the quality of
videos in the continuous mode as well as in the parking mode, and set whether to carry
out audio recording, and also set the speaker volume.
2.
Video quality: The quality of the videos, to be stored while in the continuous (driving) as
well as in the parking mode, can be set at high or low level. If the quality is enhanced, it
will be possible to see video more clearly in high quality. However, the file size will grow
and the storage time will be shortened (Caution: It is required to be set after formatting
the memory card if needed to change the video quality.)
3.
Audio recording: The black box is designed to record the video and audio at the same
time. When the audio recording is disabled (Mute), only the video will be recorded while
not recording audio.
4.
Speaker volume: The sound output for the voice notification and video playback can be
set. It can be set to be mute or stage 1, stage 2 or stage 3. The higher the stage goes,
the louder the sound becomes.
5.
After completing selections of modes, press save button to save the selected settings.
1.
By selecting driver setting tab, you can set driver information and license number of
the vehicle. This is a useful function when a separate memory card is used for each
driver.
2.
After completing selections of modes, press save button to save the selected settings.
49
Advertisement
Table of Contents
