Urive Albatross II MD-7500P User Manual page 35

15. Albatross II – Voice information (2)
Entering the parking mode will be impossible if 0% is assigned for it in the SD card.

If you need to use the parking mode, change the SD card's parking mode memory

allocation to 25% or 50%.
Message about restarting the system: This message will be displayed when the

system restarts as the environment setting is changed.
Message about entering parking mode: This message will be displayed to notify

that the LCD will be turned off before entering the parking mode and starting to
record.
Message about shifting to continuous mode: This message will be displayed when

the system changes from the parking mode to the continuous mode as the ignition
key is turned on.
Message about shifting to parking mode: This message will be displayed when the

system changes from the continuous (driving) mode to the parking mode as the
ignition key is turned off.
Message when the system finishes: This message will be displayed when the

power is turned off.
35