Table of Contents
Advertisement
20. Black-box configuration (1)
◆ Black Box configuration: when users press
window like below. It is separated with time, screen, voice/image and user
setting tap.
[ Configuration ]
button in the viewer main screen, it shows configuration
1.
Play path shows the date and time of the station.
2.
Select the
button on the Viewer Main screen. select the drive on
connected to a memory card.
3.
If you select the Preferences tab, constant mode impulse, the impulse parking
mode, blocking voltage, and parking mode, you can set the usage of the SD.
4.
Driving impulse setup : Set up a degree of impact by which an event recording
is activated. Select either 'Fast setup' or 'Manual setup'. Fast setup is sensitive,
normal, in sensitive of the three stages can be selected.
5.
Parking mode shock level setting: For setting the level of shocks to record
events when shocks occur while parked. The user can select from high,
medium and low levels.
6.
Parking mode motion detection sensitivity setting: For setting the level of
sensitivity to detect motions while parked. Can select among high, medium
and low levels.
7.
Blocking voltage setup : Blocking voltage setup is reference voltage setup and
separated by a timer set. The reference voltage setup is [11.5V], [11.7V],
[11.9V], [12.1V] to available as a choice to step 4. timer is 6 hours, 12 hours,
24 hours, 48 hours can be selected in four steps. Select one among total eight
steps.
8.
Parking mode memory usage setting: For determining the SD card memory
usage that will be applied in the parking mode (Selects from 0%, 25% and 50%)
9.
When you click the Save button after you select this, the environment setting is
finished.
46
Advertisement
Table of Contents
