Urive Albatross II MD-7500P User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Quality

Known for its

Assurance

Good Design

product

Acquired the Q

User Manual

mark — the first

for a black box.

This system is for assisting people in driving safely.

Users should properly use the product for its original purposes, considering that they will be responsible for

all the accidents that might occur.

Table of Contents

Summary of Contents for Urive Albatross II MD-7500P

Page 1 Quality Known for its Assurance Good Design product Acquired the Q User Manual mark — the first for a black box. This system is for assisting people in driving safely. Users should properly use the product for its original purposes, considering that they will be responsible for all the accidents that might occur.
Page 2: Table Of Contents
Content 01. Before using the Urive Albatross II 18. Main window of the viewer 02. About the product 19. Viewer buttons 03. Cautions before using 20. Black-box configuration 04. Precautions in using the product 21. Playlist 05. The product and its features 22.
Page 3: Before Using The Urive Albatross
$50million in accordance with the applicable software copyright laws.  Some changes can be made to Urive Albatross for further improvement without any notice to users.  Some images used in this manual may look different depending on the printing state and the actual color of the screen ...
Page 4: About The Product
 The manufacturer shall not be liable for product failures or damages due to misuse, incorrect installation or unauthorized alteration.  The Urive Albatross PC viewer program can be run with Window XP/Vista/Windows 7.  The product and manual can be changed for further improvement without any notice to users.
Page 5: Cautions Before Using
- The SD Memory Card should be formatted at least twice a month to ensure reliability. - Use of SD Cards exclusive for Urive is recommended. (contact us at the time of purchase) - Please be careful to pop out the Micro SD card, when you install or remove it.
Page 6: Precautions In Using The Product
04. Precautions in using the product This Section is for your safety and proper use of the Product to prevent safety accidents/risks. The manufacturer shall not be responsible for troubles caused by use of the Product in violation of the instructions. Warning.
Page 7: The Product And Its Features
05. The product and its features The product - An LCD black box with two channels for FULL HD / HD videos - A wide touch LCD screen is also embedded - Capable of continuous recording, event recording, and manual recording, and can capture images Main features Wide touch LCD blackbox : A LCD touch screen with a resolution of 800x480 is embedded.
Page 8: Features
06. Features (1)  Clear picture and wide angle of view for high definition images(FULL HD/ HD) Albatross II can record any accidents in clear images and security images with extremely high resolution (front: 1920x1080/ rear: 1280x720) and wide angle(front: 120°/ rear: 110°) of camera in the parking lot day and night. ...
Page 9 Built-in Battery Discharge Protection and timer setting up  Urive Albatross is fitted with a device that prevents battery discharge during constant power use. When the voltage becomes low during recording in the parking mode to the set cut-off voltage, power on Black Box is automatically cut off so as to prevent consequential battery discharge.
Page 10: Components
07. Components Please check the all of the components in the box as the picture below. If the components are damaged, please contact your retailer immediately. Basic components Main Second Main Urive SD card Double-side Sixangle Manual body camera and...
Page 11: Part Names And Functions
08. Part names and functions (front camera) ① ⑫ ② ⑧ ③ ⑦ ④ ⑨ ⑬ ⑤ ⑩ ⑥ ⑪...
Page 12 08. Part names and functions (front camera) Names Functions ① Stand Transparent stand 5 million-pixel front camera lens (Based on the pixels for still ② Camera lens frames) High-luminance blue LED for indicating the operational state and ③ Security LED providing security effect ④...
Page 13 08. Part names and functions (Rear camera) ④ ① ④ ⑤ ③ ② Names Functions ① Stand Transparent stand ② Camera lens 3 million-pixel front camera lens (Based on the pixels for still frames) ③ Connection port 5-pin micro USB port for connecting to the main body ④...
Page 14: Product Functions /Pin Arrangement Info
09. Product functions /Pin arrangement info.  Functions Operation State Voice notification LED indication blue LED will turn on during boot-up, and will blink when booting is completed. The green LED at the right Supplying power After booting is completed “Recording is now in progress”...
Page 15: Upgrade
10. Upgrade (1) [How to Manual-Upgrade] Copy the upgrade firmware files to Micro SD card. ( www.urive.co.kr Urive download center ) Users should format the Micro SD card in the Albatross II viewer or the black box main body. And then copy the upgrade files (MD7500P_Bootmain.bin, MD7500P_Eboot.bin, MD7500P_Kernel.bin, MD7500P_Meminfo.bin, MD7500P_Rootfs.bin)
Page 16 Viewer Check the firmware version at the Urive Albatross program information window. And then formatting the memory card in the PC or Viewer. (But after formatting, users cannot check the firmware version.) Check the driver’s location which is connected with memory card at the Urive Albatross II program information window.
Page 17 10. Upgrade (3) [How to auto-upgrade ] [ NOTICE ] After Pushing the update button, if users can show the windows safety warning window as below, users should push the ‘Unblock’ button. when users push the ‘Keep Blocking’ button, auto-update would be failed cause of windows safety issue.
Page 18: Installation Precautions
11. Installation precautions  When it is installed, users should off the car engine and do on a flat surface.  Users should check it can record the front and rear as video images well before exact installation.  Please install it without connecting external(second) camera to the main device. ...
Page 19: Installation Of Urive Albatross
12. Installation of Urive Albatross II – Front camera Clean the spot on the front Connect the power cable window where the product is to the DC port installed. Turning power Affix the Mount on the desired switch will bring up an intro point.
Page 20 12. Installation of Urive Albatross II – Rear camera Connect the power cable Clean the spot on the rear to the DC port and turn window where the product is on the power. installed. When booting is completed, the front video will be...
Page 21: Gui Structure
13. Albatross II GUI structure (1) [Previous button] Booting Booting success [Menu (Home) button] After touch, installed 1 min. later Front/Rear Touch Selection Touch Screen save mode 2minutes later Setting icon Home Rebooting Home button button Touch Previous button [ Driving Mode ]...
Page 22 13. Albatross II GUI structure (2) Parking monitoring Booting installed Swift driving mode System In case of memory usage 0% rebooting [ Parking Mode]...
Page 23: Albatross Ii - Gui Explanation
14. Albatross II – Visual display ㅇ When booting is completed in the continuous mode, the screen will display videos in real time. ㅇ While on the video screen, it is possible to check information such as firmware version, video recording time (year, month, date, time, minute, and second), video quality, audio recording, GPS signal reception, resolution, recording state [REC, EVT).
Page 24 14. Albatross II – Menu window ㅇ While on the video screen, touching the LCD screen will bring up the menu screen. ㅇ The menu screen will show eight icons for front video, rear video, image recording, LCD off, formatting, video view, system state, and setting. ㅇ...
Page 25 14. Albatross II – Screen saver ㅇ When one minute passes without any touch on the video screen, the screen saver will be activated. However, if the screen saver is set as “Disabled”, the LCD screen will be turned off automatically after 2 minutes.
Page 26 14. Albatross II - Video play [Menu (Home) Button ㅇ Video view: For checking the lists of files of continuous recording, event recording, motions detected while parked, and events recorded while parked, and playing back them directly for Video play checking.
Page 27 14. Albatross II – Video play ㅇ Video view: Checks the lists of files of continuous recording, event recording, motions detected while parked, and events recorded while parked, and playing them back directly for checking. ㅇ Selecting and clicking a file from the list of files will play back the saved video.
Page 28 14. Albatross II – System state [Menu (Home) Button System status ㅇ Formatted date: Shows when the memory card was formatted. ㅇ Continuous file/Event file/Parking file/Parking impact files: Shows the number of recorded files. ㅇ Firmware version: Shows the current firmware version of the black box. ㅇ...
Page 29 14. Albatross II - Setting [Menu (Home) Button Setting Icons Meaning Details For setting the continuous mode shock level, the parking mode System setting shock level, the parking mode motion detection sensitivity, the cutoff function, the parking mode SD storage space , and the time. For correcting the coordinates, and also for setting the PIP Screen setting function, the screen saver and the rear video shift function.
Page 30 14. Albatross II – System setting (1) [Previous button] [Menu (Home) button] System setting Icons Meaning Details Continuous mode Low, Medium, shock level setting High Parking mode shock Low, Medium, level setting High Parking mode motion Low, Medium, detection sensitivity High setting...
Page 31 14. Albatross II – System setting (2) [Previous button] [Menu (Home) button] Icons Meaning Details 11.5V, 11.7V, 11.9V, 12.1V Blocking voltage 6Hours, 12Hours, 24Hours, setting 48Hours Parking Mode 0%, 25%, 50% SD Capacity Year, Month, Day, Hour, Minute, Time setting Second...
Page 32 14. Albatross II – Display setting [Previous button] [Menu (Home) button] Screen setting Icons Meaning Details Correction will be completed when Coordinates For correcting touch pushing the three points shown on the correction coordinates screen (The top left, top middle and center of the screen) For turning on and off the PIP on/off setting...
Page 33 14. Albatross II – Voice setting [Previous button] [Menu (Home) button] Audio setting Icons Meaning Details Voice recording Voice recording or Mute Volume Speaker Volume setting...
Page 34: Albatross Ii - Information Message
15. Albatross II – Voice information (1) Warning  This message will be displayed while upgrading is in progress. The black box will  restart automatically after updating is completed. Be careful not to turn the power off. This message will be displayed while the memory card is being formatted. It will ...
Page 35 15. Albatross II – Voice information (2) Entering the parking mode will be impossible if 0% is assigned for it in the SD card.  If you need to use the parking mode, change the SD card’s parking mode memory ...
Page 36 15. Albatross II – Voice information (3) Message about failure in formatting: This message will be displayed when  formatting can not be performed due to defects with the micro SD card. Required to format the micro SD card using a computer. ...
Page 37 15. Albatross II – Voice information _ Pop up (1) Message for confirming whether to change the parking mode memory assignment  Message for the application of the cutoff voltage and time  Message for confirming whether to format the memory card. ...
Page 38 15. Albatross II – Voice information _ Pop up (2) Message about entering the menu mode: For notifying that video recording will  stop. Message about problems in playing back files  Message for notifying that there is no rear camera connected. ...
Page 39: Albatross Ii - Information Voice
16. Albatross II – Voice information Voice notification Situation -When recording videos after boot-up. -When recording videos after setting is completed. Recording is in progress. -When recording videos after the system is checked. -When recording videos after video view is completed. - When the video view, system state and setting menus are selected.
Page 40: Installation Of The Viewer
17. Installation of the viewer Users install the saved viewer (UriveAlbatrossII.exe) in the Micro SD card (or downloaded from Urive homepage) and then click the following steps. (But, Don’t touch your mouse or keyboard when the computer pass the process No.5 component.)
Page 41: Main Window Of The Viewer
18. Main window of the viewer Full screen (Front) Minimization/ Exit Viewer/firmware Zoom version information and auto update Viewing the map ON/OFF and Switching the Map Google to Daum Open files. SD format File arrangement Front Video (ascending order) Playback control Black Box configuration Tracking and tracing the driving record...
Page 42: Viewer Buttons
19. Viewer buttons (1) Program version information This button is for going directly to the Urive homepage and shows viewer, firmware version information. Users can check the version information and update the viewer and firmware by connecting Micro SD to PC.
Page 43 19. Viewer buttons (2) Moving buttons fie previous frame/next frame Pause of video images and moving to previous frame / next frame unit Play start Playing a file at the list and restarting the pause video. Pause Stop the play Screen print Printing the whole screen of the viewer..
Page 44 19. Viewer buttons (3) G-force/Velocity Graph These are toggle buttons which are used to display acceleration and velocity graphs, respectively. The velocity graph is available only when the GPS module (optional) is mounted. Driving History This button is used to display information on the driving history. The information is available only when the GPS module (optional) is mounted..
Page 45 19. Viewer buttons (4) For shifting from Google maps to Daum maps Can select map link sites between Google and Daum. For shifting between front and rear videos Can change the locations of the front and rear videos on the PC viewer. For showing the acceleration and speed graphs Pushing the button will pop up the acceleration and speed graphs.
Page 46: Black-Box Configuration
20. Black-box configuration (1) ◆ Black Box configuration: when users press button in the viewer main screen, it shows configuration window like below. It is separated with time, screen, voice/image and user setting tap. [ Configuration ] Play path shows the date and time of the station. Select the button on the Viewer Main screen.
Page 47: Screen Setting
20. Black-box configuration - Screen setting [ Screen setting] When the screen setting tab is selected, users can determine whether to use the PIP function, the screen saver and the rear video shift function. PIP Mode : Functions to check live videos of the front and rear view in a LCD screen simultaneously.
Page 48: Time Setting
20. Black-box configuration (3) – Time setting [ Time setting] Time Settings tab, the black-box time settings and standard time settings are available. Black Box Time Setup : If the GPS (option) Module is not in use, you can set time to the Black Box.
Page 49 20. Black-box configuration (4) – Voice/image/user setting [ Voice/image setting] When the audio/video setting tab is selected, it will be possible to set the quality of videos in the continuous mode as well as in the parking mode, and set whether to carry out audio recording, and also set the speaker volume.
Page 50: Playlist
21. Playlist ◆ The video data, recorded by the black box and then stored in the micro SD card or in a computer, can be selected and played back all or by type and. The list of files can be arranged in ascending or descending order.
Page 51: File Open
22. File open ◆ Replaying stored video images : By opening a black box file in a specific folder, replay starts as it enters to the file list automatically. If you want to replay a specific file, press replay button after selecting the file you wish to reply in a file list. Take Micro SD card out of the black box and connect it compute.
Page 52: Format And Restore The Sd Card
23. Format and restore the SD card (1) Take Micro SD card out of the black box and connect it computer. If you select button in main screen of viewer, SD format tab where Micro SD card can be formatted will appear as shown in the picture of (1).
Page 53 23. Format and restore the SD card (2) ◆ SD inspection and restoration : functions to fix errors or restore bad sectors in SD memory. Proceed this procedures after closing all other application programs accessing (using) the memory in SD card. Take Micro SD card out of the blackbox and connect it computer.
Page 54: Tracking The Driving Record
24. Tracking the driving record (1) ◆ Trip record is not stored in a parking mode but stored every 10 seconds only during driving. Maximum one month driving record can be stored per Dat file and the trip records are automatically listed in the driving record sorted by date in a line.
Page 55 24. Tracking the driving record (2) ◆ This table is explanation for icons in the “shuttle history trace” window. Button Description To Open Setup folder Of Micro SD having Driving history files(extension .dat) At the map screen to save the file as a bitmap. To print the map screen.
Page 56: Full-Screen View
25. Full-screen view ◆ Click the switching button at the top of the viewer to view the full screen of front/rear images. Full screen mode : button in top of Viewer, will Switch the front screen to change to the full screen mode. Return to the screen : To return to the previous screen in full screen, button clicked will return...
Page 57: Digital Zoom
26. Digital Zoom ◆ While a video is being played back, clicking the front screen or the rear screen, or clicking the zoom button will make it possible to use the digital zooming function to enlarge the screen. Zooming button Zooming button: Pushing the button will enlarge the front and rear videos using the digital zooming function.
Page 58: File Folder's Structure
- EXAMPLE of file creation : “20130101_231545_A2.avi” January 01, 2013 23:15 45 at the beginning is made o f two channels parking event video file. 6. Setup Folder : Users setup folder. 7. UriveAlbatrossII.exe : the installation file for the exclusive PC Viewer (downloadable from the Urive website)
Page 59: Each File Size And Saving Capacity
28. Each file size and saving capacity ◆ Recording files can be stored as following its amount of quota for regular files, event files, parking files and parking event files. There might be some differences depending on the memory card characteristics. 8,16,32 GB Class Parking 0%...
Page 60: Product Specifications
 Dimension : 101.9 x 63.3 x 35.9 mm (Body) / 53.6 x 27 x 24.5 mm (Extra Camera)  Capacity : 16GB Micro SDHC Card Class 10 for Urive ( adapted up to 32GB)  Recording Method : Constant, Event, Manual (air touch), Parking (event) recording, image saving ...
Page 61: Warranty
30. Warranty Urive Products are covered under warranty for a period of year. Components and consumable parts other than the main body are covered by a separate warranty.  This warranty is only available based on the data filled in the warranty card.
Page 62: Terms Of Consumer Damage Compensation
31. Terms of Consumer damage compensation A/S outside A/S within Type of Consumer Damage warranty warranty Product requiring essential repair within 10 days of purchase Replacement Major part requiring repair within 1 month of purchase Replacement Not applicable Product requiring essential repair within 1 month of replacement Replacement Refund of full Functional defect...
Page 63: Customer Service Center
32. Customer service center Thank you for purchasing Urive Albatross. ㅇ Inquiries for products and A/S services If you have any problems using the product or experience inconvenience, you can contact the following number before visiting our A/S center. ㅇ Customer support center...
Page 64: Before Requesting For A/S
When returning the defective product, please ensure that it is adequately packaged  to prevent damage in transit. Sender’s detail (name, telephone number, address and brief description of defect) inside the package will expedite A/S services. * Urive website [Support] - [Service Center] Please refer to the contents.
Page 65: Pre-Fault Diagnosis
34. Pre-fault diagnosis Symptoms How to respond If you do not have GPS, select System Settings from the Black-box time is not accurate. menu mode, the time setting time setting is available through the menu. Power ON / OFF switch to check. I do not turn on Please confirm that the power cable is connected correctly.