Table of Contents
Advertisement
8
INSTALLATION
1. DUCTLESS INSTALLATION
a.
b.
c.
d.
e.
f.
INSTALLATION
Make sure all preparation steps are completed.
Feed the wires coming out of the hood through the bottom of the cabinet.
Lift the unit up flesh against the wall and the bottom of the cabinet.
Using the screws and washers provided, insert into each of the 4 keyhole
openings (2 on each side) and tightly secure the unit against the bottom
of the cabinet. NOTE: Install more screws through the back of the unit if
necessary.
Connect a 6" or 7" ducting to the collar of the hood. (DUCTED MODEL
ONLY)
Seal the connection points with aluminum tape. (DUCTED MODEL ONLY)
Advertisement
Table of Contents
