Operation - Fujitsu 9373329060 Operating Manual

OPERATION

Instructions relating to heating are applicable only to "HEAT & COOL MODEL" (Reverse Cycle).
To start/stop operation
To set the operation mode
G Operation mode setting
G Room temperature setting
Lower Rise
G Fan speed setting
ECONOMY OPERATION
Press the start/stop button.
Operation lamp
Air conditioner ON: Lit brightly
Air conditioner OFF: Not lit
Press the master control button to set the operation mode.
If DRY is selected, the fan speed will be set to AUTO.
AUTO COOL
Press the set temperature buttons to set the room temperature.
Temperature setting range
AUTO ............................................... 18 to 30 °C
COOL/DRY ....................................... 18 to 30 °C
HEAT ................................................ 16 to 30 °C
Press the fan control button to set the fan speed.
AUTO HIGH
Press the ECONOMY button to start or stop ECONOMY OPERA-
TION.
For details on the function, refer to page 10.
DRY FAN HEAT
MED LOW QUIET
En-4