OPERATING MANUAL BEDIENUNGSANLEITUNG MODE D’EMPLOI MANUAL DE FUNCIONAMIENTO MANUALE DI ISTRUZIONI ΕΓ ΕΙΡΙ∆Ι ΛΕΙΤ ΥΡΓΙΑΣ РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ MANUAL DE INSTRUÇÕES KEEP THIS MANUAL FOR FUTURE REFERENCE BEWAHREN SIE DIESES HANDBUCH ZUM SPÄTEREN NACHSCHLAGEN AUF CONSERVEZ CE MANUEL POUR RÉFÉRENCE ULTÉRIEURE CONSERVE ESTE MANUAL PARA SU FUTURA CONSULTA CONSERVARE IL PRESENTE MANUALE PER FUTURE CONSULTAZIONI ΦΥΛΑ...
CONTENTS SAFETY PRECAUTIONS ..........1 TEMPERATURE SET BACK TIMER ....... 9 NAME OF PARTS ............2 OPERATING TIPS ............10 PREPARATORY OPERATION ......... 3 ADJUSTING THE DIRECTION OF AIR CIRCULATION ..11 OPERATION ..............4 FILTER LAMP RESET ........... 11 TIMER FUNCTIONS ............
NAME OF PARTS Remote controller 1 Start/Stop Button C Horizontal Airflow Direction 2 Set Temperature Button and Swing Button 3 Master Control Button D Filter Button 4 Fan Control Button E Operation Lamp 5 Economy Button F Timer and Clock Display 6 Timer Mode (CLOCK ADJUST) G Operation Mode Display Button...
PREPARATORY OPERATION Set the current day and time Press the DAY button and select the current day. appears around the selected day. Press the timer mode (CLOCK ADJUST) button for 2 seconds or more. The time display on the remote controller will flash. Press the set time buttons to set the current time.
OPERATION Instructions relating to heating are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). To start/stop operation Press the start/stop button. Operation lamp Air conditioner ON: Lit brightly Air conditioner OFF: Not lit To set the operation mode G Operation mode setting Press the master control button to set the operation mode.
OPERATION Room temperature sensor selection Indoor unit Press the ECONOMY button for more than 2 seconds to select whether the room temperature is detected at the in- door unit (remote sensor) or the remote controller. When the thermo sensor display appears, the room temperature is detected at the remote controller.
TIMER FUNCTIONS OFF timer (See page 6.) Use this timer function to stop air conditioner operation. The timer operates and air conditioner operation stops after the set time has passed. The timer can be set up to 24 hours in advance. ON timer (See page 6.) Use this timer function to start air conditioner operation.
WEEKLY TIMER Weekly timer setting SU MO TU WE TH FR SA 3 6 9 12 15 18 21 Press the SET button for 2 sec- Press the timer mode button to select the weekly timer. onds or more. G Day of the week setting SU MO TU WE TH FR SA Press the DAY button to select the day of the week, and then press the SET button to confirm the setting.
WEEKLY TIMER WEEKLY timer operation G To start G To cancel SU MO TU WE TH FR SA 3 6 9 12 15 18 21 When the weekly timer is selected, the • Press the DELETE button to cancel 3 6 9 12 15 18 21 timer starts automatically.
TEMPERATURE SET BACK TIMER Temperature SET BACK timer setting SET BACK SU MO TU WE TH FR SA If there is no existing SET BACK tempera- ture setting, “- -” will be displayed for the 3 6 9 12 15 18 21 temperature.
OPERATING TIPS Instructions relating to heating are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). About ECONOMY OPERATION Dual Remote Controllers (optional) At the maximum output, ECONOMY OPERATION is approxi- An additional remove controller can be added up to the maxi- mately 70% of normal air conditioner operation for cooling mum of two remote controllers.
ADJUSTING THE DIRECTION OF AIR CIRCULATION Instructions relating to heating are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). Start air conditioner operation before performing this procedure. To set the operation mode G Vertical air direction adjustment (Swing operation) * Press the START/STOP button to start the air conditioner, and then proceed as follows.
TROUBLESHOOTING Instructions relating to heating are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). WARNING! In the event of a malfunction (burning smell, etc.), immediately stop operation, turn off the electrical breaker, and consult authorized service personnel. Merely turning off the unit’s power switch will not completely disconnect the unit from the power source. Always be sure to turn off the electrical breaker to ensure that power is completely off.