Configuring The Ip Encoder; Procedure 3-3 Accessing The Ip Encoder Configuration Page - American Dynamics VideoEdge User Manual

Web Configuration

Configuring the IP Encoder

The main configuration page of the IP Encoder contains all the settings necessary to configure the
IP Encoder.
The configured items are:
• Security
• TCP/IP Network
• Video Inputs
• Serial Ports
• Sensornet Network
• Event Inputs
Note
Any changes to the configuration are only saved when Save Config is selected.

Procedure 3-3 Accessing the IP Encoder Configuration page

1 Login to the IP Encoder, refer to Procedure 3-1.
2 Select Configuration from the Front Page.
The Configuration main page will be displayed, as shown in Figure 3-6.
Note
To view the bottom of the main Configuration page it will be necessary to use the Scroll Bars on
the Browser window.
3-8 Installation and User Guide