Quantum LTO-3 Quick Start Manual page 3

Figure 2 SAS Interface
Connectors
Figure 3 AC Power Connector
Figure 4 Power Button
Connecting the Drive Interface and Power Cables
LTO-3 (Model B), LTO-4 (Model B), LTO-5, and LTO-6
b Connect the other end of the external SAS interface cable to the SAS connector
on the host server.
5 Connect the supplied AC power cable to the AC power connector on the back panel
of the 1U Rackmount enclosure (see
AC power connector
6 Connect the other end of the AC power cable to the rack/facility AC power
receptacle.
7 Press the drive power pushbutton switch on the front panel of the 1U Rackmount
enclosure, illuminating the power LED. (see
8 Turn on all attached accessory devices, such as printers and other SCSI devices that
you turned off at step 2 of this procedure.
9 Turn on and restart the host server.
SAS connectors
Figure 3).
Figure 4).
Power button
3