Quantum LTO-3 Quick Start Manual page 10

LTO-3 (Model B), LTO-4 (Model B), LTO-5, and LTO-6
Figure 14 Connecting the SCSI
and Power Cables
Figure 15 Connecting the SAS
and Power Cables (LTO-3 and
LTO-4 Only)
10
Connecting the Tape Drive Cables
To connect the tape drive cables:
1 For a SCSI tape drive, connect the following cables to the back of the tape drive (see
Figure 14).
a SCSI cable
b Power cable
c SCSI ID selector switch
SCSI cable
SCSI ID selector
2 For an LTO-3 (Model B) and LTO-4 (Model B) SAS tape drive, connect the following
cables to the back of the tape drive (see
a SAS cable
b Power cable
SAS cable
Power cable
Figure 16).
Power cable
Installing a Second Tape Drive or Replacing a Tape Drive