LTO-3 (Model B), LTO-4 (Model B), LTO-5, and LTO-6
Figure 17 Re-installing the Top
Access Panel
SCSI Cable
Configurations
12
The 1U rackmount enclosure supports the operation of two tape drives on either one or
two SCSI buses. Two internal 2-port SCSI cables are installed in the enclosure and ready
for tape drive connections depending on your configuration.
•
Connecting Two Drives per SCSI Bus
•
Connecting One Drive per SCSI Bus
Connecting Two Drives per SCSI Bus
Use the configuration shown in
SCSI bus.
Top panel
Latch screw
Figure 18
when connecting both tape drives to the same
Installing a Second Tape Drive or Replacing a Tape Drive
Latch