Power Trim And Tilt - Mercury 135 Optimax User Manual

Hide thumbs Also See for 135 Optimax:
Table of Contents

Advertisement

Function
Oil Pump Failure
Engine Overspeed
Sensor out of Range
ENGINE GUARDIAN SYSTEM
The Engine Guardian System monitors the critical sensors on the engine for any early indications of problems.
The system will respond to a problem by emitting a continuous beep and/or reducing engine power in order to
provide engine protection.
If Guardian System has been activated, reduce throttle speed. The horn will turn off when throttle speed is within
the allowable limit. Consult your dealer for assistance.
SMARTCRAFT PRODUCT
A Mercury SmartCraft System instrument package can be purchased for this outboard. A few of the functions the
instrument package will display are engine RPM, coolant temperature, battery voltage, fuel consumption and
engine operating hours.
The SmartCraft Instrument package will also aid in Engine Guardian diagnostics. The SmartCraft Instrument
package will display critical engine alarm data and potential problems.

Power Trim And Tilt

Your outboard has a trim/tilt control called power trim. This enables the operator to easily adjust the position of the
outboard by pressing the trim switch. Moving the outboard in closer to the boat transom is called trimming in or
down. Moving the outboard further away from the boat transom is called trimming out or up. The term trim generally
refers to the adjustment of the outboard within the first 20° range of travel. This is the range used while operating
your boat on plane. The term tilt is generally used when referring to adjusting the outboard further up out of the
water. With the engine turned off, the outboard can be tilted out of the water. At low idle speed, the outboard can
also be tilted up past the trim range to permit, for example, shallow water operation.
FEATURES AND CONTROLS
Warning Horn
Continuous
Continuous
Continuous
Intermittent Beep
Sound
25
Description
Engine Guardian System is
activated. Power will be limited.
The warning horn is activated if
the oil pump should ever stop
functioning electrically. No
lubricating oil is being supplied
to the engine.
The warning horn is activated
any time engine speed
exceeds the maximum
allowable RPM. The system
will limit the engine speed to
within the allowable range.
Engine overspeed indicates a
condition that should be
corrected. Overspeed could be
caused by incorrect propeller
pitch, engine height, trim angle,
etc.
Engine Guardian System is
activated. Power will be limited.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

150 optimax175 optimax

Table of Contents