Sample Copy - Ricoh Copy/Document Server Operating Instructions Manual

D
Set the originals.
When placing originals on the exposure glass, start with the first page to be
copied. When placing originals in the ADF, set the first page on top.
When placing originals on the exposure glass or in the ADF using the Batch
function, press the {q} key after all the originals have been scanned.
E
Press the {Start} key.
Note
❒ To confirm the type of finishing, press the {Sample Copy} key in step
Reference
"Input/Output", "General Features", General Settings Guide

Sample copy

You can use this function to check the copy settings before making a long copy
run.
Important
❒ This function can be used only when the Sort function is turned on.
A
Select Sort and any other necessary functions, and the place the originals.
B
Press the {Sample Copy} key.
One copy set is delivered as a sample.
C
If the sample is acceptable, press [Continue].
The number of copies made is smaller than the specified number by one.
Note
❒ If you press [Suspend] after checking the results, you can return to step
You can change the settings for Staple, Punch, Duplex (1 Sided → 1 Sided,
1 Sided → 2 Sided), Orientation, Margin Adjust., Cover Sheet, and Desig-
nate. However, depending on the combination of functions, you may not
be able to change some settings.
ANP013S
Copier Functions
2
D
.
A
.
59