Centre/Border Erase (Different Width) - Ricoh Copy/Document Server Operating Instructions Manual

Copying
F
Press [Centre], and then set the erase centre width with [n] and [o].
Pressing [n] or [o] changes the width in increments of 1 mm (0.1 inch).
Pressing and holding down the relevant key changes the width in increments
of 10 mm (0.4 inch).
If you select to erase the image on the back of the original, press [2 Sided Set-
ting] and [Back].
Erasing the image on the back is valid when you copy 2-Sided originals.
2
G
Press [Border], and then set the erase border width with [n] and [o].
Pressing [n] or [o] changes the width in increments of 1 mm (0.1 inch).
Pressing and holding down the relevant key changes the width in increments
of 10 mm (0.4 inch).
H
Press [OK] twice.
I
Place the originals, and then press the {Start} key.

Centre/Border Erase (different width)

This mode erases both the centre and edge margins of the original image.
A
Press [Edit / Stamp].
B
Press [Erase].
C
Press [Erase Centre / Border].
D
Press [Erase Centre/ Border].
96