Sort - Ricoh Copy/Document Server Operating Instructions Manual

A
Press [Reduce / Enlarge].
B
Press [Dir. Size Mag. mm].
C
Enter the horizontal size of the original with the number keys, and then
press the {q} key.
You can enter sizes between 1 to 999 mm (0.1" to 99.9") in 1 mm (0.1") steps.
D
Enter the horizontal size of the copy with the number keys, and then press
the {q} key.
E
Enter the vertical size of the original with the number keys, and then press
the {q} key.
You can enter sizes between 1 to 999 mm (0.1" to 99.9") in 1 mm (0.1") steps.
F
Enter the vertical size of the copy with the number keys, and then press the
{q} key.
G
Press [OK] twice.
H
Place the originals, and then press the {Start} key.
Note
❒ To change a length in steps
enter the new value.

Sort

The machine assembles copies as sets in sequential order.
Important
❒ To use the Rotate Sort function, two paper trays with paper identical in size
and different in direction (KL) are required. See "Tray Paper Settings", Gen-
eral Settings Guide.
❒ You cannot use the bypass tray with Rotate Sort.
C F
to , press the key you wish to change and
Copier Functions
2
57