When Interrupting Printing - Ricoh Copy/Document Server Operating Instructions Manual

Document Server
Note
❒ You can search the target document using, in step
Name] situated in the upper left side of the screen.
❒ Some of the selected document may not be printed due to the difference in
the size or resolution.
❒ When changing the printing order, cancel the highlight and then specify
the order correctly.
❒ Pressing the {Clear Modes} key cancels every selection.
❒ Pressing [Order] displays the selected documents in the printing order.
❒ The copy and printer features holds the specified printing conditions after
the operation is over and applies them at the next printing.
❒ When two or more documents are specified, the printing conditions are
4
stored on the first document but not on the succeeding documents.
❒ Following settings are available for the printing conditions. For respective
printing results, see "Copier Functions".
• Book binding style (2 Sided Top to Top, 2 Sided Top to Bottom, Maga-
zine, Booklet)
• Treatment of front cover (Cover/Slip Sheet, Edit / Stamp)
• Finish (Sort, Rotate Sort, Stack, Staple, Punch)
❒ When printing two or more copies while selecting the sort function, you
can confirm the finish by printing only one copy.
❒ When printing two or more documents at a time, you can print them as a
single continuous document by specifying the order of their printing.
❒ When printing two or more documents at a time, the printing conditions
set for the first document are applied to all the remaining documents.
❒ When two or more documents are selected, pressing [U][T] allows you to
confirm the user name, document name and printing order being designat-
ed for deletion in step
❒ Pressing [Select File] restores the document selection screen.
Reference
p.43 "Copier Functions"

When Interrupting Printing

Following describes the procedure for interrupting printing work.
A
Press the {Clear/Stop} key
B
Press [Suspend].
170
B
.
B
, [User Name] or [File