Changing The User Stamp Position; To Program The User Stamp - Ricoh Copy/Document Server Operating Instructions Manual

Changing the user stamp position

Changes the stamp position.
A
Press [Change] under Stamp Position.
B
Select the desired position, and then press [OK].

To program the user stamp

This function scans an image that is used as a user stamp.
The range of stamp images for readability is 10–297 mm (0.4"-11.7") high and 10–
432 mm (0.4"-17.0") wide. However, if the value exceeds the maximum value of
2
the area (5,000 mm , 7.75 inch
Important
❒ Up to four frequently used images can be stored in memory.
A
Make sure that the machine is in copier mode.
B
Press the {User Tools/Counter} key.
2
), it is corrected within the range of the area automatically.
ZGVX040E
ANP016S
Copier Functions
2
105