User Tools Menu (Copier And Document Server Features) - Ricoh Copy/Document Server Operating Instructions Manual

User Tools Menu (Copier and Document
Server Features)
This section describes items that can be specified on the copier initial screen.
Copier initial screen can be displayed by pressing the {User Tools/Counter} key.
For more information about how to set up these items, see General Settings
Guide.
❖ General Features
Item
Auto Image Density Pri-
ority
Copy Quality
Image Density
Original Orientation in
Duplex Mode
Copy Orientation in Du-
plex Mode
Max. Copy Quantity
Auto Tray Switching
Paper Display
Original Type Display
Tone: Original Remains
Job End Call
Connect Copy Key Dis-
play
Switch Original Counter
Display
Customize Function: Cop-
ier
Customize Function: Doc-
ument Server Storage
Customize Function: Doc-
ument Server Print
6
Description
You can set whether Auto Image Density is "On" or "Off" when
the machine is turned on, reset, or modes are cleared.
You can adjust the copy quality level for each original type.
You can adjust the image density level for each original type.
You can set the original orientation when making two-sided copies.
You can set the copy orientation when making two-sided copies.
The maximum copy quantity can be set between 1 and 999.
If you load paper of the same size in two or more trays, the machine
automatically shifts to the other when the first tray runs out of pa-
per (when Apply Auto Paper Select is selected.) This function is
called "Auto Tray Switching". This setting specifies whether to use
Auto Tray Switching or not.
You can choose to have the available paper trays and sizes shown
on the initial display.
You can have the original types shown on the initial display.
The beeper (key tone) sounds if you forget to remove originals after
copying.
You can choose whether or not the beeper sounds when copying is
complete.
You can specify whether or not to display the key for Connect
Copy.
You can select the original counter display.
You can assign up to six frequently-used functions to Copy Func-
tion keys.
You can assign up to six frequently-used functions to Document
Server Storage keys.
You can assign up to six frequently-used functions to Document
Server Print keys.