Changing Number Of Print Copies While Printing Is In Progress; Sample Print - Ricoh Copy/Document Server Operating Instructions Manual

Changing Number of Print Copies while Printing is in Progress

Following describes the procedure for changing the number of print copies after
printing is stared.
Important
❒ This feature is enabled when the sort function is selected in the printing con-
ditions.
A
Press the {Clear/Stop} key.
B
Press [Change Quantity].
C
Enter the number of print copies anew using the number keys.
D
Press the {q} key.
E
Press [Continue].
Printing will be resumed.
Note
❒ The range of print copies enterable in step
pressing the {Clear/Stop} key.

Sample Print

When print copies are massive, you can print a single copy in advance to check
appropriateness of the printing order of the selected documents and the printing
conditions.
Important
❒ This feature is enabled when the sort function is selected in the printing con-
ditions.
A
Select the document to be printed.
When a password is set, enter it and then press [OK].
B
Press the {Sample Copy} key.
Only one copy will be printed.
Using the Document Server
C
depends on the timing of your
4
171