Removing Plug-Ins; Enabling And Disabling The Buzzer - Promise Technology SMARTSTOR NS4300N User Manual

SmartStor NS4300N Product Manual
To add a plug-in to SmartStor:
1. In the Tree, click the + beside the Management icon.
2. Click the System Upgrade icon, then click the Application Plug-in tab.
3. From the Volume dropdown menu, choose the Volume that has the folder
with the plug-in file.
4. From the Folder dropdown menu, choose the Folder that contains the
plug-in file.
5. In the File Name field, type the name of the plug-in file.
Or highlight the file and copy the name, then paste the name into the field.
6. Click the OK button to begin the installation.
When the installation is done, PASM displays a notification dialog box.
7. In the confirmation box, click the OK button.

Removing Plug-ins

There are two reasons to remove a plug-in:
• To replace the old plug-in with a new one
• You know that you will never use the plug-in
Before you remove a plug-in, consider disabling it, instead. See "Enabling and
Disabling Plug-ins" on page 125.
To remove a plug-in from SmartStor:
1. In the Tree, click the + beside the Management icon.
2. Click the System Upgrade icon, then click the Delete Plug-in tab.
3. Click the option button to the left of the plug-in you want to delete.
4. Click the OK button.
5. In the confirmation box, click the OK button.

Enabling and Disabling the Buzzer

The SmartStor has a buzzer that sounds when the SmartStor is finished booting
and when a problem is detected. The buzzer is enabled by default.
Promise recommends that you leave the buzzer enabled.
Do not disconnect the power or shut down the SmartStor while the
plug-in installation is running!
Warning
144