CTC Union IGS?401F?4PH24 Quick Installation Manual

CTC Union Technologies Co., Ltd.
Far Eastern Vienna Technology Center
(Neihu Technology Park)
8F, No. 60 Zhouzi St., Neihu District, Taipei 114
Taiwan
T +886‐2‐26591021
F +886‐2‐26590237
E sales@ctcu.com
To download this QIG or a more complete user manual, please visit
http://www.ctcu.com/Industrial/
©2013 CTC Union Technologies Co., Ltd.
All trademarks are the property of their respective owners.
Technical information in this document is subject to change without notice.
Introduction
IGS‐401F/402F/402S‐4PH24 models are non‐managed industrial
grade Gigabit PoE (Power over Ethernet) switches that provide
stable and reliable Ethernet transmission. Housed in rugged DIN
rail or wall mountable enclosures, these switches are designed for
harsh environments, such as industrial networking and intelligent
transportation systems (ITS) and are also suitable for many
military and utility market applications where environmental
conditions exceed commercial product specifications. Standard
operating temperature range models (0 to 60°C) and wide
operating temperature range models (‐40 to 75°C) fulfill the
special needs of industrial automation applications.
Features
• Redundant dual DC inputs 24/48VDC
• DC Power "boost" feature
• IP30 rugged metal housing
• Wide temperature range ‐40~75C (‐E models)
• Support for Ethernet jumbo frames
• DIP switch enable/disable broadcast storm filter
• UL508, CE, FCC, EN50121‐4 Rail traffic
• Industrial grade EN61000‐6‐2 EMS and EN61000‐6‐4 EMI
Specifications
Ethernet Interface
• Connector: RJ‐45 (shielded)
• 4 PoE enabled ports, Alternate A Mode
• Auto MDI/MDI‐X
• Speed: 10/100/1000Base‐T (Auto)
• Duplex: Full/Half (Auto‐negotiation per IEEE802.3u)
• Supports IEEE802.3x Flow Control
• Store & Forward Switching Fabric: 12Gbps non‐blocking
• Packet buffer: 1mb
• Standards: IEEE802.3, 802.3u, 802.3x, 802.3ab, 802.3z
802.3af (15.4W PoE), 802.3at (30W PoE, 120W total)
• 8K MAC table
• MTU: 64~10240 bytes
• Broadcast Storm protection (enable/disable by DIP)
• Positive (VCC+) pins 1,2 (55VDC ±1V)
• Negative (VCC‐) pins 3,6
sales@ctcu.com w w w . c t c u . c o m
Quick Installation Guide
IGS‐401F‐4PH24,402F‐4PH24, IGS‐402S‐4PH24
IGS‐401F‐4PHE24, 402F‐4PHE24, IGS‐402S‐4PHE24
Industrial Grade Gigabit PoE Switches
sales@ctcu.com
Specifications (cont.)
Optical Ethernet Interface
• 1000Base‐X, 1‐port (401), 2‐ports (402)
• Fixed SC connectors (401F and 402F models)
• Pluggable SFP x 2 (402S model)
• Multimode (2km) 50/125um, 62.5/125um
• Single mode (30 or 50km) 9/125um
• Wavelength: 1310nm (S/M or M/M)
Power
• Absolute range: 20~57VDC
• Reverse polarity protection: Yes
• Dual power inputs: Yes
• Connector: removable terminal block
• Consumption: 2.89A@48VDC, 138.2Watts (120W for PoE)
5.97A@24VDC, 143.2Watts (120W for PoE)
Mechanical
• Water & Dust Proof : IP30 Protection
• Dimensions : 106 x 62.5 x 135mm (D x W x H)
• Mounting : DIN‐Rail, Wall Mount (kits included)
• Weight : approximately 850 g
Environmental
• Operating Temperature :
•
0°C ~ 60°C, ‐40°C ~ 75°C (wide temp. for *‐E)
• Storage Temperature: ‐40°C ~ 85°C
• Humidity : 5 ~ 95% (non‐condensing)
Certifications
• EMI: FCC Part 15 sub B class A, EN55022 Class A, EN61000‐6‐4
• EMS: (Electromagnetic Susceptibility)
•
EN61000‐6‐2 Immunity for Industrial Environment
•
EN61000‐4‐2 (ESD) Level 3,Criteria B
•
EN61000‐4‐3 (RS) Level 3,Criteria A
•
EN61000‐4‐4 (Burst) Level 3,Criteria A
•
EN61000‐4‐5 (Surge) Level 3,Criteria B
•
EN61000‐4‐6 (CS) Level 3,Criteria A
•
EN61000‐4‐8 (Magnetic Field) Level 3,Criteria A
• Safety: UL508 (pending)
• Railway Traffic: EN50121‐4
• Shock: EN60068‐2‐27 Freefall: EN60068‐2‐32
• Vibration: EN60068‐2‐6
• MTBF: 316408 hr(401F), 306704 hr(402F). 334448 hr(402S)
V1.0