Ringer; Handset Volume - Siemens optiPoint 410 advance S User Manual

Step by Step
>

3=Ringer?

Melody 2 Tone sequ. 1
o e
Melody 3 Tone sequ. 2
>
05=Handset vol.?
Ringer
The tone sequence can be varied in 3 steps, the melody
in 8 steps. During programming you may switch be-
tween the tone sequence and melody input fields using
the arrow keys
Prerequisite: You are in the "Audio Settings"
menu.
:
Select and confirm. The current setting is displayed.
>
>
Use the arrow keys to select the input field for music or
tone sequence.
I
to Use these keys (1-5) on the keypad to change the values
as required.
:
Confirm to change. The new setting is displayed.

Handset Volume

You can adjust the handset volume as follows:
Prerequisite: You are in the "Audio Settings"
page 61.
:
Select and confirm. The current setting is displayed.
>
The value can be increased or reduced by using either
uv
the control keys on the telephone or
<>
the arrow keys or
o e l
to the keypad keys.
:
Confirm the setting. The new setting is displayed as a
>
value.
< >
and
If configured, the ringing tone may be different
from the settings made here.
Customizing the Telephone
.
page 61
63