Auto Dial Timer; Hold Ringback Timer - Siemens optiPoint 410 advance S User Manual

Customizing the Telephone
Step by Step
Switch off?
>

15=Auto Dial Timer?

o e
>
17=Hold Ringback Timer?>
44
or
:
Confirm. Daylight saving deactivated.
>
The new setting is displayed.
Auto Dial Timer
You can use this menu option to specify the time delay
following input of the phone number before the phone
automatically dials the number without you having to
press the
The valid range is 1 (automatic dialing after 1 second) to
9 (automatic dialing after 9 seconds).
This does not affect automatic dialing of the des-
ignated emergency number.
Prerequisite: You are in the "Configuration" menu
page 38.
:
Select and confirm.
>
Configure the number of seconds using
uv
the control keys on the telephone or
<>
the arrow keys or
m
to the keypad keys.
:
Confirm the setting. The value for the new setting is dis-
played.

Hold Ringback Timer

Use the option Hold Ringback Timer to change the
time after which you are reminded that you still have a
call on hold.
The minimum value is 3, which provides ringback after
3 minutes. The maximum value is 15, which provides
ringback after 15 minutes.
Prerequisite: You are in the "Configuration" menu
page 38.
:
Select and confirm. The current time is displayed.
Configure the number of minutes using
uv
the control keys on the telephone or
:
key.