Installing A Hard Drive - Bosch DIP-7080-00N Installation Manual

16 en | Chassis setup and maintenance
3.2.2

Installing a hard drive

The drives are mounted in drive carriers.
To install a hard drive to the hard drive carrier:
1.
2.
3.
4.
5.
2013.09 | V2 | DOC
Remove the screws securing the dummy drive to the carrier.
Remove the dummy drive from the carrier.
Install a new drive into the carrier with the printed circuit board side facing down so that
the mounting holes align with those in the carrier.
Secure the hard drive by tightening all 6 screws.
1 Drive carrier
Replace the drive carrier into the chassis bay. Make sure that the drive carrier handle is
completely closed.
2
Installation Manual
SAS/SATA hard drive
Bosch Sicherheitssysteme GmbH
DIVAR IP 7000 2U