HYT TC-320 User Manual page 9

1. Plug the AC connector of the switching power into the AC outlet socket.
2. Plug the Mini USB connector of the switching power into the Mini USB jack of the
radio or charger.
3. Place the radio with the battery attached in the charger when the charger indicator
glows green to indicate the power supplies normally. (Please skip this step if you don't
use a charger)
4. Make sure the radio is connected to the switching power or the charger. The charging
process initiates when the Charge Indicator of the radio glows red.
5. The Charge Indicator glows green when the battery is fully charged. Please remove
the radio then.
Battery is charging.
Battery is fully charged.
Note: Make sure the radio is attached with a battery before charging, and is powered off
during charging.
Please follow these steps to charge a battery using the desktop charger:
Status
Charge Indicator solidly glows red.
Charge Indicator solidly glows green.
Charge Indicator of the Radio
8