NetComm NTC-6000 Series Quick Start Manual page 9

NTC-6000 Series - M2M WiFi Router
Step Three: Preparing your Computer
Connect one end of the supplied Ethernet cable to the Ethernet port
of your router and connect the other end to the Ethernet port of your
PC. The router is configured using a web browser. In order for your
PC to connect to the router, configure your PC to obtain an IP address
automatically from the router using DHCP. Windows users may use the
following procedure.
Configuring your Network Adapter in Windows
Follow the path Start -> Control Panel -> Network Connections.
Right click Local Area Connection and select Properties to open the
configuration dialogue box of Local Area Connection as below:
9