NetComm NTC-6000 Series Quick Start Manual page 17

Step Six: Connect to the Cellular Network
This section describes how to set up the Cellular Router to initiate a
wireless WAN connection via PPP. There are 2 different ways:
Initiating the PPP Connection directly from the Cellular Router
acting as the PPP Client (most common).
Initiating the PPP Connection from a different PPP client
(i.e. laptop or router) with the Cellular Router running in PPPoE
mode. This method is not documented in this quick start guide.
Initiating a PPP Connection from the Cellular Router
Click the Internet Settings > WWAN (3G) link on top panel of the status
page to open the Connection page.
NTC-6000 Series - M2M WiFi Router
17