Subaru 2004 Impreza Service Manual page 25

MANUAL TRANSMISSION AND DIFFERENTIAL
NOTE:
Remove caulking before taking off lock nut.
ST2
ST1
2) Remove 5th driven gear using ST and press.
ST 498077000 5TH DRIVEN GEAR REMOV-
ER
ST
3) Remove woodruff key.
4) Remove roller bearing and 3rd-4th driven gear
using ST1 and ST2.
ST1 499757002 SNAP RING GUIDE
ST2 899714110 REMOVER
5) Remove 2nd driven gear assembly.
6) Remove 3rd-4th driven gear key.
7) Remove 1st driven gear, 2nd gear bushing and
gear & hub assembly using ST1 and ST2.
Replace gear and hub if necessary. Do not attempt
to disassemble if at all possible because they must
engage at a specified point. If they have to be dis-
assembled, mark the engaging point beforehand.
Drive Pinion Shaft Assembly
MT-00822
MT-00823
ST1
ST2
MT-00824
5MT-94
ST1 499757002 SNAP RING GUIDE
ST2 899714110 REMOVER
8) Remove 1st gear bushing, 1st driven gear thrust
plate and roller bearing using ST and press.
ST 498517000 REPLACER
CAUTION:
Replace roller bearing (41 × × × × 71 × × × × 23) with a new
one if this disassembly is performed.
ST
(A) 1st gear bushing
ST1
ST2
MT-00825
(A)
MT-00826