Subaru 2004 Impreza Service Manual page 24

ST1 499987300 SOCKET WRENCH (50)
ST2 899884100 HOLDER
ST2
ST1
5) Remove the 5th driven gear using ST.
ST 499857000 5TH DRIVEN GEAR REMOV-
ER
6) Remove the woodruff key.
7) Remove the roller bearing, 3rd-4th driven gear
using ST1 and ST2.
ST1 499757002 INSTALLER
ST2 899714110 REMOVER
8) Remove the key.
Drive Pinion Shaft Assembly
9) Remove the 2nd driven gear, inner baulk ring,
synchro cone and outer baulk ring. (Except 1.6 L
model)
MT-00247
10) Remove the 2nd driven gear assembly. (1.6 L
S T
model)
11) Remove the 1st driven gear, 2nd gear bushing,
gear and hub using ST1 and ST2.
NOTE:
Replace the gear and hub if necessary. Do not at-
tempt to disassemble if at all possible because they
MT-00248
must engage at a specified point. If they should be
disassembled, mark engagement point before-
hand.
ST1 499757002
ST2 899714110
ST1
ST2
MT-00249
12) Remove the sub gear for 1st driven gear.
2. FWD MODEL
1) Loosen lock nut using ST1 and ST2.
ST1 49987100 or 499987003 or 899984103
ST2 899884100
5MT-93
MANUAL TRANSMISSION AND DIFFERENTIAL
(C)
(A) 2nd driven gear
(B) Inner baulk ring
(C) Synchro cone
(D) Outer baulk ring
INSTALLER
REMOVER
SOCKETWRENCH (35)
HOLDER
(D) (A)
(B)
MT-00250
ST1
ST2
MT-00251