Display Symbols; Function Keys - Pfaff 3371-10 series Instruction Manual

7

Display symbols

.05.02
Program number
The current seam program number appears under this symbol.
Speed
The current speed appears under this symbol.
X Size factor X (crosswise)
The size factor in X-direction in % appears under this symbol.
Y
Size factor Y (lengthwise to arm)
The size factor in Y-direction in % appears under this symbol.
Bobbin thread counter/piece counter
The current value for counting the piece or bobbin thread appears under this symbol.
Enter
If the key under this symbol is pressed, the input is concluded.
7

Function keys

.05.03
P1
With the function keys functions are switched on or off, parameters and operating modes
are selected and relevant values changed.
Each time a key is pressed, an acoustic signal is given (factory setting). If function keys are
pressed which are not permitted in accordance with the machine status, or if the top or
bottom limit of the input value is reached, a double signal tone can be heard.
A value is changed with the corresponding +/-key. In this way, e.g. by pressing and holding
+/- on key 6, the speed value 5 can be changed.
P4 P5 P6 P7 P8
P2 P3
TE
X Y
11 2500 100 100
5
6
P
C1
C2
C3
TE
Controls
7 - 4