Pfaff 3371-10 series Instruction Manual page 48

Input
Group
11 - 14
Parameter Description
000 025 Thread wiper solenoid
operating time [10 ms]
The time, for which the solenoid is
under full current, is entered.
026 Thread wiper solenoid Duty-cycle [%]
No function at present
100 101 Software version main processor
The software version of the main
processor is displayed
102 Software version sewing drive unit
The software version of the sewing
drive module is displayed.
103 Software version control panel
The soft- and hardware version of the
control panel are displayed.
200 201 Program number
The program number of the program
to be processed is selected.
202 Button hole model
The button hole model (number of
holes in the button) is selected.
203 Coordinates of the first hole
The coordinates of the hole are entered.
204 Coordinates of the second hole
205 Coordinates of the third hole
206 Coordinates of the fourth hole
207 Coordinates of the fifth hole
208 Coordinates of the sixth hole
209 Stitch positions
The number of stitch positions on one
edge are entered.
210 Stitch formation
The stitch formation depends on the
type of button selected, see Chapter
11.04 Free input of the seam pattern
(Teach in) of the instruction manual.
Setting Set value
range
5 – 100 10
5 – 100 100
0300.xxx
V.xx
V.xxx/ H.xxx
50 - 99 50
2 – 4 2
xx.yy
xx.yy
xx.yy
xx.yy
xx.yy
xx.yy
1 - 20 4
0 – 2 0
(0 – 3)