Mounting The Table Top (For Deliveries Without Stand) - Pfaff 3371-10 series Instruction Manual

Installation and commissioning
8

Mounting the table top (for deliveries without stand)

.01.04
3
3
5
4
6
1
2
Fig. 8 - 04
Drill holes in the table top as shown in the drawing, see Chapter 8.01.05 Table top drill
hole plans.
Screw on the oil outlet 1.
Screw the oil tank 2 to oil outlet 1.
Set the rubber pads 3 in the fastening holes of the oil pan 4 and screw oil pan 4 to the
table top.
Set support 5 in the appropriate hole.
Place wick 6 iin the holders of oil pan 4.
8 - 3