Table of Contents
Advertisement
7
Control panel
.06
The control panel is used to display and access machine functions for set-up and welding, to
enter parameter values and to read error messages and service settings.
Fig. 7 - 05
The control panel has the following control and display elements:
● The display screen 1 consists of a two-line, alphanumerical LCD display with 16 symbols
per line and is used to show relevant information and selection parameters.
● The plus-minus keys 2 are used to select or alter the functions and parameters shown on
the display.
● The function keys 3 are used to switch the relevant function on or off. Activated functions
are shown in each case by an illuminated LED.
7
Symbols on the display
.06.01
In addition to texts and set values, the following symbols are shown on the display
1
2
3
P1
Current program number
Maximum speed in current seam sector
P2
P3
P4
P5
P6
F1
Controls
P
TE
17
Advertisement
Table of Contents
