Using Fips Codes For Weather Alerts - Uniden UM415 Owner's Manual

The US National Weather Service established 6-digit Federal Information Processing System

using Fips codes for weather alerts

(FIPS) codes to issue weather alerts in specific areas. You can choose which areas you want
to hear alerts for by entering these FIPS codes in your radio. This can prevent you from being
bothered by events that are far from where you are boating. The radio only sounds the alert
tone if an incoming FIPS code matches one of the areas you selected.
For more information about how the NWS uses FIPS codes, see the NWS website: www.
nws.noaa.gov/nwr/nwsfipschg.htm.
x
To see an index of FIPS codes by state, see the website of the National Institute of
Standards and Technology (NIST): www.itl.nist. gov/fipspubs/co-codes/states.htm.
x
For information on the Canadian implementation of FIPS codes, called Canadian Location
Codes, see the website of the Meteorological Service of Canada (MSC): http://www.msc.
x
ec.gc.ca/msb/weatheradio/transmitter/index_e.cfm
#
nOte: if you travel outside the areas you have entered into your radio, you may not hear
alerts that affect your new location. Be sure to enter the Fips codes of all the areas you plan
Follow the steps below to edit the list of FIPS codes. You can store up to 30 different FIPS
to travel to during this trip.
codes in your radio.
Press and hold -
1. Display the normal menu and choose the Setup sub-menu.
2. Select FIPS Codes. The screen displays any previously-entered FIPS codes.
3. To add a new FIPS code, select New.
4. Use
increases the number and
CHANNEL UP
5. When the first digit is correct, press
the remaining five digits of the FIPS code in the same way. If you make a mistake while
entering a digit, press
left digit.
6. When the sixth digit is correct, press
and asks you to confirm. To save this code, select Yes; to cancel this code, select No. The
radio returns to the list of FIPS codes.
7. To change an existing FIPS code, select the code you want to change.
8. To delete the FIPS code, select Delete. To edit the code, select Edit, then use
and
9. When you are satisfied with the list of FIPS codes, select Exit to close the menu screen.
CHANNEL DOWN
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
Use the up and down arrows
Setup
to adjust each of the six
FIPS Codes
and to change the first of the six digits;
CHANNEL DOWN
CHANNEL DOWN
to erase the wrong number and moved the cursor to the
CLR-SCAN
buttons to change each of the six digits.
digits in turn.
[New]
decreases it.
. The cursor moves to the next digit. Enter
ENT-1W/25W
. The radio displays the new FIPS code
ENT-1W/25W
16
FIPS Code
000000
Back[CLR] Forward[ENT]
CHANNEL UP
CHANNEL UP
English
19