Uniden UM415 Owner's Manual page 30

2. Select DSC Call sub-menu, then select POS Request.
3. The radio displays the names listed in your directory; use
to choose the directory entry you want to contact and press
contact a station that is not in your directory, select Manual. The radio prompts you to
enter the MMSI number you want to call. Enter the MMSI number the same way you
enter directory entries (see page 22). Enter all nine digits and press
4. The radio displays the MMSI number you are about to contact and asks you to confirm.
If you want to request the position of the displayed MMSI number, select Send. To cancel
the request, select Cancel.
5. When the other station responds, the radio displays the MMSI number, the longitude,
and the latitude of the other station. If your radio is connected to a chartplotter through
the NMEA OUT connection (see page 34), the position information will also be displayed
on the plotter screen.
6. If the other station does not have valid GPS data, the radio displays No Position.
When another station requests your current position, the radio displays the following screen:
Receiving a position request (Position Reply)
To send your current position to the other station, select Reply; the radio transmits your
latitude and longitude to the other station. If you select Reply but the radio does not have
valid GPS data, it transmits the reply code with No Position.
To reject the position request, select Cancel.
If you want the radio to automatically transmit your current position whenever it receives a
Enabling automatic position reply
position request, you can enable automatic position reply. Most boaters activate automatic
position reply for safety reasons or because they subscribe to a marine towing service.
Sometimes—for example, in some competitive situations--you may not want other stations
to get your position without your manual confirmation
1. Press and hold
2. Select Setup and then POS Reply.
3. Choose Auto and press
when it receives a position request.
4. To disable automatic position reply, repeat the steps above and select Manual.
If your radio is connected to a GPS receiver, you can send your boat's position to someone
Sending your own position (Position Send)
else. If you are requesting assistance or using an all ships call to give a safety warning, you
can send your current position so other stations know where you are:
30 English
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
POS Request
JOHN HENRY
Reply
Cancel
to display the normal menu.
CALL-MENU
. The radio will automatically transmit your position
ENT-1W/25W
CHANNEL UP
ENT-1W/25W
88
A
and
. If you want to
CHANNEL DOWN
.
ENT-1W/25W