Position Request And Reply - Uniden UM415 Owner's Manual

If you want to send a test call to a station that is not in your directory, select Manual. The
radio prompts you to enter the MMSI number you want to call. Enter the MMSI number
the same way you enter directory entries (see page 22). Enter all nine digits and press
button.
4. The radio displays the MMSI number you are about to call
ENT-1W/25W
and asks you to confirm. If you want to call the displayed
number, select Send. To cancel the call, select Cancel.
5. The radio automatically switches to channel 70 to transmit
the test call request, then switches back to the last-used
channel.
6. When the other station acknowledges the test call, the
radio displays an acknowledgement screen.
When another station sends you a test call, the radio displays
Receiving Test Calls
the test request screen.
To acknowledge the test call, select Reply.
To reject the test call, select Cancel.
If you want the radio to automatically reply to all test call, you
Enabling automatic test call reply
can enable automatic test call reply.
1. Press and hold
2. Select Setup and then Test Reply.
CALL-MENU
3. Choose Auto and press
acknowledgement when it receives a test call.
Press and hold -
4. To disable automatic test call reply, repeat the steps above and select Manual.

position request and reply

Anytime you need to know where another boat currently is—to find your boating partners,
Requesting another station's position (POS Request)
to respond to a request for assistance, etc.—you can send a position request to their radio:
1. Press
CALL-MENU
Test
Acknowledged
123456789
Completed
to display the normal menu.
. The radio will automatically send an
ENT-1W/25W
Setup
to display the call menu.
16
USA
Exit
[CLR]
Test Reply
Auto
Test Reply
Manual
Back[CLR]
For Sales Information Please Contact RoadTrucker Inc
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
Test
123456789
Send
Cancel
Test
123456789
Reply
Cancel
16
Select[ENT]
English
(www.RoadTrucker.com)
16
16
29