Installation Data - Space-Ray PTS 40-N7/L7 Installation And Operation Instructions Manual

IGNITION MODULE DIAGNOSTICS IGNITION MODULE DIAGNOSTICS IGNITION MODULE DIAGNOSTICS IGNITION MODULE DIAGNOSTICS
Flame Fault Flame Fault Flame Fault Flame Fault
If at any time the main valve fails to close completely and maintains a flame, the full time flame sense circuit
will detect it and energize the combustion blower. Should the main valve later close completely removing the
flame signal, the combustion blower will power off following the post purge period.
Fault Conditions Fault Conditions
Fault Conditions Fault Conditions
Error Mode Error Mode Error Mode Error Mode
Internal Control Failure Internal Control Failure Internal Control Failure Internal Control Failure
Air Flow Fault Air Flow Fault Air Flow Fault Air Flow Fault
Gas valve failure (stuck open) Gas valve failure (stuck open)
Gas valve failure (stuck open) Gas valve failure (stuck open)
Ignition Lockout Ignition Lockout
Ignition Lockout Ignition Lockout
The LED located on the ignition module will flash ON
for ¼ second, then OFF for ¼ second during a fault
condition. The pause between fault codes is 3
seconds.
24.0)

INSTALLATION DATA

Date of
Installation:
Serial
No.
Model: PTS or PTU PTS or PTU PTS or PTU PTS or PTU
Form 43343530
Aug 2012
LED Indication LED Indication LED Indication LED Indication
Stea Stea Stea Steady On dy On dy On dy On
1 Flash 1 Flash 1 Flash 1 Flash
2 Flashes 2 Flashes
2 Flashes 2 Flashes
3 Flashes 3 Flashes
3 Flashes 3 Flashes
# of Heaters in
System:
-51-
N = Natural Gas
L = Propane Gas