Assembly Of Extension Section - Space-Ray PTS 40-N7/L7 Installation And Operation Instructions Manual

10.1)

ASSEMBLY OF EXTENSION SECTION

See typical assembly overview (Section 8.0) for typical complete assembly. Assemble additional extension
sections as required for all systems. (See Sections 7.0), and 8.0) for typical layout details.)
Join the tube sections together and secure with tube couplings as described below:
1. Place the compression coupling over the end of the tube.
2. Use the small hole at the centerline of the coupling to check that the coupling is inserted correctly.
3. Partially tighten the bolt nearest the end of the tube (approximately half closed).
Form 43343530
Aug 2012
T T T T he following he following coupling he following he following coupling tightening instructions MUST coupling coupling
followed properly to ensure the integrity of the tube followed properly to ensure the integrity of the tube followed properly to ensure the integrity of the tube followed properly to ensure the integrity of the tube
connections. Two #10 self connections. Two #10 self- - - - drilling screws connections. Two #10 self connections. Two #10 self
at every coupling as shown in the instructions below. Failure at every coupling as shown in the instructions below. Failure at every coupling as shown in the instructions below. Failure at every coupling as shown in the instructions below. Failure
to do so may result in serious injury or property damage. to do so may result in serious injury or property damage. to do so may result in serious injury or property damage. to do so may result in serious injury or property damage.
-19-
tightening instructions MUST b b b b e e e e tightening instructions MUST tightening instructions MUST
drilling screws MUST drilling screws drilling screws MUST be installed MUST MUST be installed be installed be installed