Removing / Replacing The Bobbin Case; Threading The Bobbin Thread / Adjusting The Bobbin Thread Tension - Pfaff 3371-1 series Instruction Manual

Setting up
9

Removing / replacing the bobbin case

.04
9

Threading the bobbin thread / adjusting the bobbin thread tension

.05
9 - 4
2
1
Fig. 9 - 04
Fig. 9 - 05
Removing the bobbin case
Open the hook cover
Pull out latch 1
Remove bobbin case 2
Replacing the bobbin case
Push bobbin case 2 into the bobbin case
base until you feel it click into place
Close the hook cover.
Place the bobbin into the bobbin case, so
that this turns in the direction shown by
the arrow when the thread is pulled.
1
Insert the thread as shown in Fig. 9-05.
Set the thread tension by turning screw 1.
Switch off the machine.
Danger of injury if the machine
starts accidentally!