Camera Id Setting - HIKVISION DS-2CC1181P(N)(-A) User Manual

Day Night Box Camera· User Manual

3.1.12 Camera ID Setting

From Camera ID submenu, you can customize the camera ID. It
also allows you to adjust the camera ID position on the monitor
screen. This series of camera supports up to 52 characters.
Select OFF to disable the Camera ID.

Select ON to enable the Camera ID.

Customizing the camera ID
Steps:
1. Set it to ON, and press the menu button to enter the submenu.
2. Set the menu button up/down/left/right to position the cursor
on the character you want.
Note: The characters include letters, numbers and symbols.
3. Press menu button to confirm your selection. The selected
character displays under the CAMERA ID and above the
characters.
4. Repeat the steps 1 through 3 to select other characters.
NR
Y LEVEL
RETURN8
Figure 3-13 NR
57
- - - | - - - 004