Aria Child Asana 35 User Manual page 47

Push down in center of carrier
and pull the shoulder belt
portion of the vehicle belt to
tighten carrier against the
vehicle seat.
CHECK to make sure carrier
is secure by holding both
sides near the lap belt guides
and moving it from side to side and front and back. The lap belt
should not loosen and the carrier should not move easily. The
carrier should not move more than 1 inch (2.5 cm) from side to
side or front to back.
After installing carrier without base check
the RED level line on the label to make
sure that it is level with the ground.
If seat is still not level, refer to page 50-51,
when using the carrier WITHOUT the base.
47
RED line MUST be
level with the ground
when installed in vehicle
WITHOUT the base.
ROJA
La línea
DEBE estar nivelada
con el piso cuando
está instalado en el
vehículo SIN la base.